GRP fibreglass flat roof on a kitchen extension in Canterbury: what the work involves
Replacing a cracked, blistered felt kitchen-extension roof in Canterbury with seamless GRP fibreglass: new OSB3 deck, corrected falls, matting, resin and topcoat.
Why patching a felt extension roof stops working
When a kitchen extension keeps leaking after repairs, and the felt is cracked and blistered across the surface, the fault is the whole membrane rather than one spot.
GRP fibreglass is laid as one continuous surface, so there are no felt laps left to open up.
What the work involves
- Set up suitable access equipment
- Remove the existing felt membrane
- Inspect the roof joists and structural supports
- Replace damaged timber decking
- Lay new OSB3 roof decking boards
- Check the drainage falls and correct them where needed
- Lay the GRP system: fibreglass reinforcement matting and resin
- Fit new perimeter trims and edge details
- Apply a protective weather-resistant topcoat
- Waterproof the junctions with adjoining walls
- Inspect the outlets and drainage connections
- Full site clearance and a final inspection
What you get at the end
A seamless, hard-wearing flat roof over the kitchen with far fewer weak points than the felt it replaces.
Roofers in Canterbury (CT1) → Free estimates and a 24/7 emergency service.